Menu
Smarter Shopping, Better Living!
0 Cart
Home>3D Printer>XY-2 Pro Series>TRONXY 3D Printer XY-2 Pro Series (Titan) 255*255*245mm
TRONXY 3D Printer XY-2 Pro Series (Titan) 255*255*245mm

TRONXY 3D Printer XY-2 Pro Series (Titan) 255*255*245mm Item NO.: XY-2 Pro Series

4.9
(170)
Write a Review
US$ 152.40 ~ US$ 254.00
Quantity 1-2 3-10 ≥11
Discount 35% OFF 37% OFF 40% OFF
Price US$ 165.10 US$ 160.02 US$ 152.40
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • 【Fast assembly】,
  • 【Rapid heating】,
  • 【Aluminum frame】
  • 【3.5 inch touch screen】,
  • 【Single cable design】,
  • 【Wearble pulley】,
  • 【Double fans extruder head】,
  • 【Auto leveling】,
  • 【Adjustment nuts】,
  • 【Filament run-out detection】,
  • 【Resume print after power-off】,
  • 【It is a DIY assembly machine. It is more suitable for some enthusiasts with 3D printing experience to buy. Of course, if you are a DIY enthusiast or a beginner who is willing to spend a lot of time to assemble and learn 3D printing, you can also choose to buy】
Product Name TRONXY 3D Printer XY-2 Pro Series (Titan) 255*255*245mm
Item NO. XY-2 Pro Series
Weight 12 kg = 26.4555 lb = 423.2875 oz
Category 3D Printer > XY-2 Pro Series
Tag TRONXY XY-2 PRO
Brand Tronxy
Creation Time 2019-11-01


TRONXY 3D Printer XY-2 PRO Fast Assembly Quick Installation Auto Leveling Continuation Print Power Filament Sensor Full Color Touch Screen 255mmX255mmX260mm


Single Cable Design: Complete wiring installation in one step. Compared with the complicated messy cable, the single cable design is more safer and convenient.Print sze: 255*255 *260/10*10*10.2inch.

Three Important Features:1) Automatic Leveling, help avoid a lot leveling troubles.Resume Printing after Power Off.2) Filament run out detection, When the filament runs out or disconnected, the printer will automatically suspended to ensure the model can be smoothly printed.3.5inch Full Color Touch ScreenNew experience, HD display, simple operation, convenient and quick.Three Steps InstallationQuickly install the TRONXY XY-2 PRO printer in just 3 steps, suitable for beginners.After-Sales ServiceTRONXY will offer lifetime technical support and give satisfactory response to you. For the jet lag or Chinese New Year holidays etc, we may not be able to respond to you in time during those special periods, but we can guarantee that we will reply to it within 24 hours under normal conditions. Please wait patiently, don’t rush to give us a bad review. Your trust will give us biggest motivation.



2022-01-20

Ch****on

i have over 60 hours on this little priter the only issue i had was the stringing everywhere ended up being the cheap nozzel they put on it! after picking up a quality nozzle its been doing great..this is my first 3d printer and its super easy to use and changing the nozle was easy. auto leveling works best if you manually level first than auto level. the slicer comes on the SD card so you have to install it on you pc was easy to use as well. only down side to this printer is the sd card slot is in the back of the printer instead of the front.

2022-01-20

Ch****on

i have over 60 hours on this little priter the only issue i had was the stringing everywhere ended up being the cheap nozzel they put on it! after picking up a quality nozzle its been doing great..this is my first 3d printer and its super easy to use and changing the nozle was easy. auto leveling works best if you manually level first than auto level. the slicer comes on the SD card so you have to install it on you pc was easy to use as well. only down side to this printer is the sd card slot is in the back of the printer instead of the front.

2022-01-02

Am****er

Really like this printer, much quieter than my ender 3. Only issue is the sd card location which is in the back of the printer. Easy fix with an extension and a little print

2021-08-29

Pa****ck

Had high hopes when this printer arrived, but it had a few issues. The bed plate was a few millimeters too low. I replaced the springs with the manufacturer recommended replacement which also failed to work. I ended up purchasing 25mm springs and that fixed everything.Printing quality is pretty good for standard PLA. There have been a few failures with adhesion every so often which makes it difficult to determine the cause. The dual filament feature is nice and works without much issue.One downside is the size of the bed. Since its an usual size, its hard to find many choices for a metal plate or 3rd party suppliers.

2021-07-28

De****ki

Your browser does not support HTML5 video.

 This is a good, but not great, printer.First, the positives:* It has a larger than average build surface of 255x255x 245mm.* It comes with a Titan dual-gear extruder (although it’s made of plastic). It worked very well with TPU on my test print.* It also has a form of rudimentary bed leveling system, although it’s not a true ABL. More of a bed leveling measurement system.* It is VERY easy to assemble, with only one ribbon cable, and one wire connector to hook up, and 4 bolts to insert and tighten. Took me maybe 10 minutes.* The control panel is a color touchscreen.* If you use the Tronxy-provided slicer, you get an image of your print on the screen.* The is a filament runout sensor.The negatives:* The Tronxy UI is confusing, at best, and the included manual did little to help out.* The SD card slot is in the back. Why would they do this?* The adjustment wheels for bed leveling are tiny.* Spring clips to hold the build surface to the heated bed are multi-colored. Just looks childish.* The bed springs are weak.* It seems the inlet to the extruder has an adaptor to allow for 2.85mm or 1.75mm filament, but whatever this black plastic cone is, it kept coming out whenever I changed filament. DON'T LOSE THIS!* They provided a flexible build plate and a greenish fiberglass plate, but didn’t say what to do with either of these. Turns out the fiberglas goes between the heated bed and the build surface, but I only learned this on the Tronxy FaceBook group.* There is no obvious way to adjust eSteps, zSteps, xSteps or ySteps. I believe you can if you flash Marlin into the machine.The filament roll holder is just a flat piece or metal. Not exactly smooth.Thoughts:The white elephant test print came out surprisingly well. I also printed out a blue TPU device to allow me to re-spool filament using a cordless drill, and I have to say, this is the best out-of-the-box TPU print I’ve ever done. I used the generic TPU (95A) material in Cura.I haven’t tried the Tronxy slicer, as I’m a long-time Cura user. Cura had a profile already available, and it worked well.This is a simple and elegant design, and for the money, it's a very good deal. I’m probably going to move to Marlin fairly quickly. I guess if I had never seen another printer I would learn the Tronxy UI, and it would be ok, but it seems too many things I need to do quickly aren’t obvious, and I need to get beyond learning the XY-2 and start using it ASAP.For the price, this is a good unit, and I recommend it. See the video and photo’s.

2021-07-19

Ke****er

This is my 2nd Tronxy XY-2Pro Titan. Grabbed this one on a lightning deal and couldn't be happier. Very solid machine. Will do a few upgrades but nothing crazy.

2021-07-18

na****ya

半年前に購入。 たまに動かす程度なので、作成したものは10点ほど・・・。ある日、電源を入れたら初期画面と”ピピピピッピッピー”と音は鳴るが画面は真っ暗。暫くして再起動して・・・の繰り返し。  メーカーに問い合わせたが対応悪い。 マザーボードを注文しようとしたが在庫切れ。 みんな壊れてるんだね。。。 他のメーカーにします。

2021-07-16

De****hy

this is the perfect 3d printer for a first time user or someone that has been 3d printing for a long time. this is not the most quiet of 3d printers so i would suggest creating an enclosure for it to keep the noise down and regulate ambient temperature. the prints that i have made so far have been great as far as print quality. i tend to run a bit slower and a little on the thin side as far as layers. for most prints i will run 35mm per sec. and .15mm layers with 40% infill. running that on this machine produced a very nice product. i have not ran any miniatures on this yet and i am going to guess they will be difficult to fine tune.absolutely love this machine and it may be sitting in the first printer place in my production room.

2021-07-14

me****ch

This printer offers superior print quality compared to my Ender 3 and Ender 3v2, at a fraction of the price.The titan extruder is a nice addition, and has been great to work with when printing Tronxy TPU (black, blue and yellow all work fine without any modifications).I upgraded the bowden tube to Capricorn and installed a PEI build surface, but ended up going back to the original/included build surface for simplicity, since I only really print PLA and TPU and both stick to it fine.I've enjoyed this printer so much that I'm looking to purchase the Tronxy X5SA-500-2E next.

2021-07-14

M****M

The XY-2 Pro Titan has been an excellent printer with only a few minor upgrades;1) Glass build surface. While not necessary, and even troublesome by comparison to the included build surface, the glass build surface offers far better bottom surface quality and superior longevity.2) TR Sensor. Included with the glass build surface, it is required as the XY08N does not detect opaque surfaces.3) Yellow bed springs. Far more rigid than the included springs, the bed tends to wobble less with them installed.4) Capricorn Tube. No explanation needed. Once you look it up, you'll understand why it's necessary. The included bowden tube will get you by for now, but order the Capricorn Tube ASAP for a far superior printing experience!Aside from those few things, I've found this printer to be of much higher quality than originally anticipated. It has far exceeded my expectations!One note: When I installed my TR sensor upgrade, it worked momentarily but after power cycling the printer, I could no longer move any axis!! However, Tronxy is replacing the sensor and the motherboard under warranty. I own several XY-2 Pro Titan and the original XY-2, amongst others, so the down time isnt the end of the world, and it's wonderful that they're taking care of the issue rather than sweeping it under the rug like some other companies tend to do.

2021-07-13

L****a

I have some mixed feelings about this product.There are things I very much like....And things I wish didn't get chosen due to limitations.So bottom line it works... from setting the box on the table to working product... 15min.... I took my time and made sure it was squared up. 45 min later I have nice prints coming out in abs...2 hrs later it very well calibrated.The extruder is a very good well known design, excellent choice.The hot end is run of the mill...works well.The table is tronxy sized...poor choice of sizes as it has little if any aftermarket support as its odd sized.It does print well nice clean prints.What I like less...Micro sd slot in the BACK.The odd sized bed come with flexible fancy plastic build surface...I had a spare glass surface from a different printer... the z zero stop appears to be capacitive or magnetic in nature this resulted in continuous crashes only averted by my quick placement of a metal spatula close or below it causing it to sense a stop.It couldn't sense the glass. Too bad because glass is my preferred surface and it lasts longer. This sensor will need to be replaced...period at least for me.I may have missed it... but active z adjustment doesn't seem to be selectable when printing...and I found z axis drift between prints . This lead to me making mechanical adjustments on the fly at the beginning. It also lead to that odd sized textured print surface having scars already.Once a print started well... it moved along and very successfully completes the print.So it works... I would rather have a z stop switch and manually level than use the provided auto level.But it does make nice prints out of the box using cura and tronxy specific settings.

2021-07-05

c****x

今回初めて3Dプリンターを購入しました、どうゆう訳か電源コードが2本同胞されていました、電源コードもアース付きのプラグでしたのでアース付きコンセントが無く別のコードを代わりに使用しました。取扱説明書どうりに設定してサンプルをプリントしましたが、思った様な物が出来ませんでした。良く調べましたら、ビルドプレートの0点を検知する近接センサー不良で、何度も設定しなおしても物が出来ませんでした。返品しようかと思いましたが面倒臭い為諦めて、代わりに近接センサーを交換してようやく物が出来る様になりました。その後しばらく調子良く使っていましたが、今度は、一番大事な電源ユニットがパンクしてしまい、電源ユニットを交換しました、さらに電源スイッチが熱で破損してスイッチの交換もしました。近くに電子部品の販売している店がない為苦労しました。最低の商品でした、初心者には難しいと思います。

2021-06-18

Am****er

The media could not be loaded.







 I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!

2021-06-18

Am****er

The media could not be loaded.








 I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!

2021-06-18

Am****er

The media could not be loaded.








 I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!

2021-05-24

Am****er

Your browser does not support HTML5 video.

 I finally have my printer at home working, without problems. The inconveniences that may arise with this equipment are in my case the control board did not work in the first shipment, I returned and they sent me a new one that did work but the SD card did not read the card. I looked everywhere how to fix the problem and I did not find an answer. I called amazon and they contacted the sellers, where they very quickly concluded that it was an equipment malfunction , and I returned it again and ordered a new one. got the printer today and without any problem, everything is perfect. I recommend 100% this Tronxy team in my opinion it is the best budget printer on the planet. tronxy printers are like Jeep Willys. They are endless.

2021-05-24

Am****er

Your browser does not support HTML5 video.

 I finally have my printer at home working, without problems. The inconveniences that may arise with this equipment are in my case the control board did not work in the first shipment, I returned and they sent me a new one that did work but the SD card did not read the card. I looked everywhere how to fix the problem and I did not find an answer. I called amazon and they contacted the sellers, where they very quickly concluded that it was an equipment malfunction , and I returned it again and ordered a new one. got the printer today and without any problem, everything is perfect. I recommend 100% this Tronxy team in my opinion it is the best budget printer on the planet. tronxy printers are like Jeep Willys. They are endless.

2021-04-11

た****ま

115Vにスイッチを設定して印刷を行うも、途中で「powering off...」と表示されて印刷が止まってしまい、まともに印刷ができない。うまく最後まで印刷されるときもあるが、止まることのほうが多く使い物になりませんでした。印刷中ではなく、設定中も同じ症状になることもあります。

2021-03-17

T****B

The media could not be loaded.







 I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.

2021-03-17

T****B

The media could not be loaded.








 I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.