TRONXY D01 Series 3D Printer 220*220*220mm Item NO.: D01 Series
Quantity | 1-2 | 3-9 | ≥10 |
Discount | 30% OFF | 30.5% OFF | 35% OFF |
Price | US$ 324.10 | US$ 321.79 | US$ 300.95 |
Copy and share this link on social network or send it to your friends
Copy- 【Guide rail】,
- 【Extruder head with light】,
- 【Ultra-quiet】,
- 【Filament run-out detection】,
- 【Resume print after power-off】,
- 【3.5 inch touch screen】,
- 【It is a DIY assembly machine. It is more suitable for some enthusiasts with 3D printing experience to buy. Of course, if you are a DIY enthusiast or a beginner who is willing to spend a lot of time to assemble and learn 3D printing, you can also choose to buy】
Product Name | TRONXY D01 Series 3D Printer 220*220*220mm |
Item NO. | D01 Series |
Weight | 10.9769 kg = 24.1999 lb = 387.1988 oz |
Category | 3D Printer > D01 Series |
Tag | TRONXY D01 , D01 |
Brand | Tronxy |
Creation Time | 2019-11-04 |
Tronxy D01 CoreXY Industrial Guide Rail 3D Printer Kit
Our Advantage:
Simple speed assembly---Easy and fast to complete the combination. Detachable panel makes your prints easy to remove from the hotbed,no longer warped edge.
Power Resume To Resume--- TRONXY D01 the break-resuming capacity can save real-time printing status and RESUME THE PRINTING JOB exactly at the same place
WHERE IT HAS BEEN STOPPED. This add-on totally DRIVES AWAY THE HASSLE OF REPETITIVE AND TIME-TIME CONSUMING PRINTING JOBS CAUSED BY UNEXPECTED POWER OUTAGE.
Filament run out detection---when the filament runs out or disconnected, the printer will automatically suspended and sends out a warning signal to ensure the model can be smoothly printed
With LED light: when the printer is printing, you could check the status of printers in real-time.
Automatic Leveling: Just need to Click the “Leveling” showed in your printer screen, without any other operations, no longer worry about leveling troubles.
3.5 inches full color touch screen: Humanized UI design and simple operation.
CNC Processing of aluminum plate : Anodizing using in surface of the aluminum plate, makes it to achieve more high accuracy.
3030R Aluminum material and Extended linear bearing with 12mm Chrome-plated optical axis LMK12LUU: Big round profile, look likes aesthetic and minimalist design.
You May Also Like
-
TRONXY D01 Enclosure 3D Printer 220*220*220mmUS$ 378.00 US$ 630.00
Newsletter
- Company Info
- About Us
- Contact Us
- News Center
- Support Center
- User Center
- Register
- My Account
- My Orders
- Tracking Order
- Forget Password
Copyright © 2012-2023 Tronxy 3D Printer All Rights Reserved.
2020-12-21
M****l
2020-07-09
Al****aT
2020-07-06
Wi****rd
2020-06-29
C****s
2020-06-29
Do****ne
2020-03-02
Da****on
2020-02-21
s****n
2020-02-11
K****K
2020-01-19
E****e
The printer comes mostly with most of the complicated parts already assembled so putting it together in around 30 minutes to one hour is entirely possible. Unfortunately my review will only be of the frame as I did lots of upgrades out of the box. The frame uses 3030 extrusions and a removable glass top for the bed. All the connectors are already labeled and are just plug in. It uses linear rails instead of linear rods or wheels. The frame is very rigid due to the fact that it uses 3030 extrusions. The rails slide easy and the bed slides easily on the included rod. The only issue was that the counter-sunk holes on one of the Z plate bearings were drilled incorrectly. This made the screws sit too far out which made them too short. I had to take a 5/16 drill bit and open the holes a bit to make them sink in to the correct location which allowed them to function correctly afterwards. The Chutu motherboard, lcd, power supply and extruder were changed to SKR 1.3, tft35, hp server power supplies and separate 5v supply and e3d Hemera were all added.
2019-11-22
R****.
2019-10-10
h****e
2019-10-07
n****e
2019-09-10
K****K
2019-08-24
mi****es
2019-08-17
J****y
2019-08-13
al****ka
the filament ships quickly from amazon, and comes in the standard sealed filament pouch. i opened it up and checked it out. TPU is different than anything i have used before. the filament feels more like a rubber band then a piece of plastic. my printer has a titan geared extruder with a 630mm bowden tube and i thought loading it in to the titan was going to be a nightmare, but it was surprisingly easy, easier then i find most PLA's. i figure it is because it is flexible that it goes where the extruder wants instead of where it wants. i loaded the filament and extruded a bit. at my nozzle temp of 230 it came right out no issue. unfortunately with a little retraction, it kept oozing out. as discovered, this is the nature of TPU. retraction is almost useless, and does more harm then good most of the time.
after some reading about printing flexible filaments, i found they needed to be printed slowly. <30mm/s. cooling can help with stringing and oozing, but wont fix it. turn retraction off, make speedy travel moves. i sliced my file up accordingly and set it to print. my favorite surface to print on is Kapton tape and i have coated my bed with it. i give it a light spray of aquanet hair spray, but i find that filaments just stick to it. it was no different with this TPU. it had excellent bed adhesion. as it printed i did find a lot of stringing. speedy travel moves helped a bit, but there was a lot of post processing needed. the processing was simple, i used some wire snips to clip the strings. but in the end i was very happy with my results.
on subsequent prints i found that temperature control is very important. the tronxy tpu seemed to print just fine in the 205 degree range, with plenty of layer adhesion. tho it is important that you have a heated bed. one of my sliced files allowed my bed to drop to 35 degrees and the print pealed right off. i suggest you print a temperature tower or other files that help you tune filament settings as it will help you find a sweet spot .
all in all the filament gets an A rating from me. i will definitely be getting more flexibles in the future , and the tronxy TPU seems very high quality. just follow some simple techniques and your prints will be just as good.