FAQ -- Problem of Leveling
2020-08-29

Problem of Leveling

1. Method of automatic leveling and manual leveling
https://youtu.be/6jwmqTOVewE

2. Automatic leveler height adjustment

First, manually loosen the screw of the leveler and adjust the leveler to the top. Tighten the screw of the leveler by hand until the nozzle is the thickness of a sheet of A4 paper from the forming platform.

Then slowly lower the automatic leveler until there is a sound and the light is on, stop lowering the leveler, tighten the automatic leveler screws, so that the height of the leveler is adjusted.

Automatic leveler failure detection and replacement video:

https://www.youtube.com/watch?v=sd5p5x3PUz4

<< Some small knowledge about 3d printing

>> COMPANY OVERVIEW - SHENZHEN TRONXY TECHNOLOGY CO , LTD - 3d printer

Cart

All CategoriesSee All >

FAQ -- Problem of Leveling2020-08-29

Newsletter

FAQ -- Problem of Leveling
2020-08-29