FAQ --- Unstable extrusion
2019-11-06

How to solve the unstable extrusion

A. Set to higher extruder temperature and lower print speed and test again.

B. Clean the nozzle and test again.

C. Check whether the filament roll can rotate and filament can be fed into the extruder smoothly.

D. Check if the nozzle is blocked.

E. Layer height is not suitable the nozzle diameter when slicing, recommend layer height is 0.15~0.36mm. The extrusion width shall be within the range of 100%~105% of the nozzle size.

<< FAQ --- Stop feeding filament

>> FAQ --- Lost steps or staggered floor

Cart

All CategoriesSee All >

FAQ --- Unstable extrusion2019-11-06

Newsletter

FAQ --- Unstable extrusion
2019-11-06