Smarter Shopping, Better Living!
Problem on off-line printing(Print from SD card)2019-11-06
Documents in SD card cannot be found
A. Check if the LCD cable connect well.
B. Re insert SD card and restart power supply, Repeat it several times to check.
C. If there is a SD card adapter, replace one and test again.
D. Unplug SD card. Clean the pad of SD card (you can clean it by eraser).
E. Clean the socket of SD card on the control board and try again.
F. Format the SD card and try again.
G. Replace a new SD card and try again.
Direct stop in the printing process
A. Check if the LCD cable connect well.
B. Replace a new SD card or SD card adapter and test again.
C. Reset control board and try again.
D. Format the SD card and copy the files and try again.
E. Change as a smaller g-code file and try again.
F. Check the connection of the power line and try again.
Cannot start after chose a file when your SD-card printing
A. Reset the printer and test again.
B. Format the SD card, and copy the test g-code file and try again.
C. Slice again to generate g-code file for testing.
Newsletter
- Company Info
- About Us
- Contact Us
- News Center
- Support Center
- User Center
- Register
- My Account
- My Orders
- Tracking Order
- Forget Password
Copyright © 2012-2023 Tronxy 3D Printer All Rights Reserved.