Name: TRONXY X5SA Pro 3D Printer 330*330*400mm
Brand: Tronxy
SKU: X5SA-Pro
Price: 538.2 USD
Availability: SoldOut
Rating: 4.9 (51 reviews)

Smarter Shopping, Better Living!

My Wishlist

0 Cart

All CategoriesSee All >

Write a Review

(47)

(4)

(0)

TRONXY X5SA Pro 3D Printer 330*330*400mm

X5SA-Pro

US$ 538.20

Reviews (51)

Write a Review

All

Image

United States

2020-08-14

D****l

Parfait pour commencer l'impression 3D
2020-07-08

K****n

Great product for the price! You can't beat the quality and build area size. It's my first printer and I hit the ground running. But like any craft, it takes practice. I would totally recommend this printer for someone new to making.
2020-06-26

T****y

This is my 1st printer and it's great! I'm a hands-on kinda guy and while I was advised not to go with this model because its not for beginners, I found out that it was a little harder than I thought to assemble but not impossible if you have a technical mindset. I'm still tweaking it to acheive the best results and it's important to say that it worked well enough right away. While waiting for delivery I watched many videos for assembly and troubleshooting and it helped a lot. Overall very satisfied with my purchase!
2020-06-16

B****e

Best filament printer on the market but I wish it did come with Different size nozzles
2020-06-11

P****a

The TRONXY X5SA PRO printer has quickly become my favorite printing platform. It was very simple to build and it produces beautiful results. It has been reliable and has delivered on everything I expected. Thanks for the great product!! This is my 4th 3D printer and the best so far. I've read the other reviews on this machine and it seems that people either love it or hate it. Frankly the negative reviews are ridiculous.If you buy this printer, DON T expect it to print by itself and reload its own filament and make you coffee while you wait. It has an operational procedure that -- if followed -- works every time. Once you learn not to lean on the print bed after you level it you'll get remarkable results. I've had 0 problems with the long Bowden tube once I tied it to the cable chain so it would not tangle with the moving parts. Never had a heat problem with the power supply. Mine is absolutely silent in operation. If you know anything about motion and control, you'll easily figure out you have to adjust the XY slider cars to have a slight preload (drag) using the eccentric screws. This improves the performance of the printer. The print head is light and the response is good. I run mine slow anyway because I never saw a benefit on any of my printers to pushing speed to the limit. You always get better results with a moderate speed.Finally, the comments regarding the software are uncalled for. I have used their TRONCY software with no problems but have fallen into using SImplify3D as I prefer that package to any other. It works perfectly with this printer. I have also used CURA and it worked fine as well.I would have concerns if this printer pushes over $500 in cost as there are better printers in that price range, however, at the price I paid I am delighted.
2020-06-04

J****n

I purchased the xy-2 pro and it has been great. I just decided I needed a second printer for my new home. So I decided on the X5SA PRO . My X5SA PRO Arrived within 15 days after purchase and in excellent condition. This tronxy x5sa pro is very popular and I can see why. It is a beast.I have never worked with a finer company than Tronxy. They are tops and will get all my future purchases.
2020-05-23

C****s

Prodotto ottimo, istruzioni per il montaggio facili e intuitive. Però non spiegano come settare bene la macchina, metterla in piano. Devono sapere che i neofiti come me queste cose non le sanno, ma con dei video in internet, ho fatto un ottimo lavoro. La prima stampa e anche le altre sono andate bene tutte al primo tentativo
2020-05-22

Ru****er

if your good at reading instructions and electronics you can build this in about 5-6 hours if not faster. I have had this printer for about a week and it has not had a day where it wasnt printing. the first few days i was doing test prints to calibrate my filament and the settings in my slicer. after that got all done i have printed upgrades in petg and now im in the process of printing a bust as a present. The quality of the prints have been good and at certain layer heights its almost as good as a injection molded item. If your having trouble with this printer id suggest checking facebook groups and other communitys to get help or even contacting support.
2020-05-17

Am****er

This is a good printer but needs upgrades the filament censer is hard to load. but short of that not bad , i would suggest an upgrade on the titan as well. I don't suggest this for first time buyers because of the assembly process.but over all good product. I'm happy with the price and Item it took 3 and half hours to complete.
2020-05-11

jo****er

Ok this is my first printer and I am a hands on person.you have to build it and the instructions are pretty good.i did a test print which turned out good and currently doin my first project print.
2020-05-11

Au****ey

very happy with product, print quality is nice just make sure to re-level the bead before each use if printer was turned off so you wont mess up the build plate like i did.. but if someone is looking for a good 3d printer you should be happy with this because of the printing quality and large build volume
2020-03-07

P****r

The printer arrived in Germany quickly within 2 days after payment, it prints well from the box. On my model is written Troxy X5SA Pro . New mainboard design. the rails with carriages did not jam before and after washing and lubrication. In general, my opinion is an excellent printer.
2020-02-10

N****n

I don’t have any issues with this.Yes it took awhile to assemble, but if you’re slightly experienced, it isn’t bad at all.Only took a couple hours and I had it printing like a champ.
2020-01-30

P****l

This 3D printer has massive capacity. You can print very large projects in it. The touch screen is very responsive, and the software is very easy to use. I had my minor issues quickly resolved by the tech support over email (all I needed to do was update the firmware). The printer really likes .gcode files. The included tools and parts are sufficient to set up the printer, plus several spare hardware pieces. There are YouTube videos that show step-by-step installation to supplement the instructions. The setup is a commitment, so be prepared to devote the necessary time to do it right. The bearings for the belt are very nice fixed rollers instead of washers like the older model. The belts are high quality. I found that the Bowden tube needs to be quite deep into its socket to get adequate feed without clogging. Overall, a great 3D printer for even a novice (who is willing to put it together).
2020-01-23

Ra****er

I have been wanting a 3d printer for a long time and glad this is the one I chose. Very easy to use! Set up was a little difficult at first but once I figured out what I was doing everything went smooth and easy.
2020-01-23

A****S

As a beginner in the 3D printing world I’m seriously loving this machine. It took me about a day to put together which I wasn’t expecting but once it was all assembled, it worked like a dream. I’m impressed with the quality of this machine as well as how quiet it is while it prints. I will be recommending this to my friends
2020-01-23

A****S

The media could not be loaded.

As a beginner in the 3D printing world I’m seriously loving this machine. It took me about a day to put together which I wasn’t expecting but once it was all assembled, it worked like a dream. I’m impressed with the quality of this machine as well as how quiet it is while it prints. I will be recommending this to my friends
2020-01-20

T****Z

I have been looking at 3d printer for a while now and finally decided it was time to buy one.

Assembly took a little while but the instructions were clear. Be sure to follow instructions and make sure everything is level. it took some adjustment but wasn't a terrible process to do.

So far i have only used the sd to print. I have done only a handful of small projects. What i can say so far is this printer is nice. Very quiet operation and components move smoothly as you would expect.
The printer parts look and feel like good quality so i expect it last quite some time. the screen also reacts as expected with no lag.

As other review has suggested there is also good facebook community for this brand. Excited to start playing more with this and getting creative to see what i can create. So many cool projects out there!
2020-01-19

N****n

I’m really into FPV quadcopters and there are several components that can be 3D printed for new builds. I picked this up recently to start making custom parts. It only took a couple hours to assemble and is going to work perfectly. The test prints all worked out well, now it’s time to do some design work!
2020-01-18

H****n

This 3 D printer is very advanced with an amazing technology> It is very convenient to use this machine to help my work because I am art related worker

1 2 3

Cart

All CategoriesSee All >

Newsletter