Smarter Shopping, Better Living!
FAQ --- If the first layer upwarp ?2019-12-24
If the first layer upwarp ?
1)Check that the hot bed has been leveled.
2)Check the surface of the hot bed for dirt.
3)Check whether the distance between the nozzle and the platform is too high, resulting in insufficient adhesive force.
4)Check the hot bed for adequate temperature.
5)Check the first layer of the slicing software to see if it is printing too fast.
Newsletter
- Company Info
- About Us
- Contact Us
- News Center
- Support Center
- User Center
- Register
- My Account
- My Orders
- Tracking Order
- Forget Password
Copyright © 2012-2023 Tronxy 3D Printer All Rights Reserved.