Smarter Shopping, Better Living!
Newsletter
- Company Info
- About Us
- Contact Us
- News Center
- Support Center
- User Center
- Register
- My Account
- My Orders
- Tracking Order
- Forget Password
Copyright © 2012-2023 Tronxy 3D Printer All Rights Reserved.
XY-2 Pro Series
I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!
I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!
I love this printer however, two things I am likely to change to my personal tastes:1) Autolevel2) BMG extruder over the Titan.Thats about it for this silky smooth printer!!
I finally have my printer at home working, without problems. The inconveniences that may arise with this equipment are in my case the control board did not work in the first shipment, I returned and they sent me a new one that did work but the SD card did not read the card. I looked everywhere how to fix the problem and I did not find an answer. I called amazon and they contacted the sellers, where they very quickly concluded that it was an equipment malfunction , and I returned it again and ordered a new one. got the printer today and without any problem, everything is perfect. I recommend 100% this Tronxy team in my opinion it is the best budget printer on the planet. tronxy printers are like Jeep Willys. They are endless.
I finally have my printer at home working, without problems. The inconveniences that may arise with this equipment are in my case the control board did not work in the first shipment, I returned and they sent me a new one that did work but the SD card did not read the card. I looked everywhere how to fix the problem and I did not find an answer. I called amazon and they contacted the sellers, where they very quickly concluded that it was an equipment malfunction , and I returned it again and ordered a new one. got the printer today and without any problem, everything is perfect. I recommend 100% this Tronxy team in my opinion it is the best budget printer on the planet. tronxy printers are like Jeep Willys. They are endless.
I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.
I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.
I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.
I bought this to replace my Creality Ender 3 Pro that was an absolute pain to keep leveled and calibrated. It was cheap and had auto bed leveling, so I pulled the trigger on it and I'm super happy I did.First, the pros:1) Leveling the bed was amazing with the auto bed leveling. My Ender 3 hurt to level. Physically and emotionally. This printer practically does it itself.2) Build plate. It's removable and slightly bendy so you can pop the pieces off easily. It's also has a 255x255x260 printable area.3) Setup was MUCH easier thatln the Ender 3. It comes shipped as pretty much two parts. A few screws to tighten and that's it.4) It's quiet! No more whirring and beeping noises when I'm printing! The whole house is thankful for that.5) Accessories. It comes with a usb thumb drive and micro sd card loaded with instructions, some test prints, and Tronxy's proprietary slicer program (which seems to work great, so I'm using that instead of Cura atm).6) filament detection will stop the print when your filament runs out so you can replace it and keep printing (yep, it has a stop and resume function).7) Saved the best for last. I didn't kleven know about this feature before I bought it and set it up. It has a touchscreen color display. The UI makes everything so easy to find. All the settings and controls and even a print preview of your gcode.Cons:I'm pretty sure this isn't the printers fault (I think) but the prints adhere to the print bed a little too well, especially when you print with a skirt. That skirt does not want to come off sometimes.This printer has big features for such an inexpensive machine. If you liked the Ender 3 but didn't like how user unfriendly it was and the lack of any auto bed leveling features, you'll love this printer. Very easy for noobs as well as more seasoned people to set up and get printing.
Amazing quality, especially for the price! I can't believe it. I don't know how they can even do this even if they didn't make a profit, it's incredible. Much better than my first 3D printer that I bought 5 years ago! this thing prints great Straight Out of the Box. Sub $200!? Wow