Customer Reviews (463)

• US$ 152.40
  ~
  US$ 254.00

  2020-09-29

  Reviews (170)

  マル****スケ

  まず、このメーカーの商品はお勧めしません。テーブル自動補正が付いているという事で初心者が買うみたいですが、最初にテーブルの平面を0.5以下に調整する必要があります。初心者にはこれができないのです。それくらいの精度で平面だしできるならテーブル自動補正は要りません。また普通はリミッターで使うはずのZセンサを独自に使っているので知っている人からするとめんどくさいです。

• US$ 152.40
  ~
  US$ 254.00

  2020-09-29

  Reviews (170)

  K****n

  定年後の人生で何か新しい事をと思い、ender3proを購入し何とか希望の物がプリントできる様になりましたが、Amazonでフィラメントを検索していた所、オートレベリングが付いた当機が激安で販売されており、思わず購入してしまいました。組み立てもボルト4本締めるだけで精度も抜群です。レベルだしに少し戸惑いましたが慣れてしまえば簡単にできる様になりました。星7つ位あげたい位です。又、ギフトーカードが入っており指示どおりに致しましたところ1Kgのフィラメントまで送って頂き大満足です。

• US$ 152.40
  ~
  US$ 254.00

  2020-09-27

  Reviews (170)

  P****a

  Instalation are super easy,calibration too.Material are resistant,the manual inside explain all to know for estarterI recomend for begginers and the price is acceptable👍🏻

• US$ 152.40
  ~
  US$ 254.00

  2020-09-24

  Reviews (170)

  b****y

  After returning two printers from other companies for quality issues. I am very pleased with thos printer. Easy to set up and perfect print first time.

• US$ 152.40
  ~
  US$ 254.00

  2020-09-22

  Reviews (170)

  H****n

  This is the first 3d printer that I've bought and I have had a lot fun with it. It is a bit of a learn as you go kind of deal if you've never done it before but I'm happy I bought this.

  

• US$ 152.40
  ~
  US$ 254.00

  2020-09-22

  Reviews (170)

  望****叶

  価格的には整形物も綺麗に仕上がり購入して良かったと思います。

• US$ 152.40
  ~
  US$ 254.00

  2020-09-20

  Reviews (170)

  池田****太郎

  専用のスライサーを使わないとステージにノズルが食い込むことがあるので初めてのモデルで印刷する時は一層目は目を離さない方がいいと思います。

• US$ 278.57 US$ 445.00

  2020-09-19

  Reviews (128)

  かせ****せい

  工作が好きで、DIYに興味がある方なら造れると思います。一部の小物部品に違ったものが有りましたが、手持ちの物で代用し悩む所も有りましたが、楽しく造ることができました。筐体もしっかりしているので、制度の良いものが印刷出来ると思います。

• US$ 16.88

  2020-09-12

  Reviews (1)

  T****y

  Greetings from Canada! I ordered this and a few more items during the pandemic and the shipping delay was terrible. The package arrived many weeks later. Damaged and missing items dropped out of the package. I contacted support an they immediately reissued. 11 days later i recieved everything well packaged with a few bonus items. Great after sales service and the items are good quality.

• US$ 357.23 US$ 664.00

  2020-09-12

  Reviews (42)

  Je****ny

  Wollte schon lange einen CoreXY haben, habe dann beim Blitzangebot vom Amazon zugeschlagen.Ich habe viel negatives über diesen Drucker gelesen, aber diesem kann ich nicht zustimmen.Der Aufbau war in ca 4 Stunden geschafft, ohne YouTube Video, nur mit der Anleitung. Die Anleitung könnte schon noch ein paar weitere Informationen beinhalten, aber sonst gut verständlich.Nach dem erfolgreichen Aufbau und Kalibrierung, druckt er sogar sehr gut. Und bin sehr überrascht darüber.Unerfahren sollte man bei dem Drucker nicht sein, weil etwas Grundkenntnisse schon von Vorteil wäre. Super Drucker.

• US$ 152.40
  ~
  US$ 254.00

  2020-09-11

  Reviews (170)

  Je****er

  We purchased this for our son for his 12th birthday. It is a great 3D printer for beginners! It has been easy to work with and easy to use!

• US$ 278.57 US$ 445.00

  2020-09-09

  Reviews (128)

  s****n

  Dear Sir, I want a 3D printer in a box,with full cartriges. please send it to sourin. Dodge.

• US$ 152.40
  ~
  US$ 254.00

  2020-09-07

  Reviews (170)

  し****ま

  まともに動作すればいいい商品だと思いますがまともに動作しません。プリント途中で電源が切れ再起動がかかることが度々起こります。この機種は電源が切れても続きから再開できる機能があるはずですが初めからの印刷になります。そのため時間やフィラメントを多く無駄にしました。当然サポートへメールで問い合わせを何度もしていますがＳＤカードを交換しろだとかファームウェアをアップデートしろだとかスライスソフトを他のものを利用しろだとか繰り返し同じことを返信してくるだけで何も進展しない状況で解決には至っていません。amazonの商品ページには24時間以内に返信があると記載がありますが3日経っても返信はなく催促してやっと返信が来るといった状況です。日本語でメールを送っていますが返信は英語であったり日本語であったりまちまちです。Tronxyの他の商品のレビューをチェックするとサポートの対応はかなり悪いようでメールを返信しないのは当たり前のようです。非常に残念なメーカーです。本製品を購入を検討されている方は他の商品レビューもチェックしたほうがいいと思われます。

• US$ 278.57 US$ 445.00

  2020-09-05

  Reviews (128)

  Po****is

  Excellent machine horrible manual. I made every mistake from putting the print head on the wrong side to having a backwards belt. I couldnt get the printer to hook up to my computer to use the slicer software and repetier. The reason was i had a usb hub that was interfering with the output. I didnt blame any of this on the machine or manufacturer. You can tell when you buy this its for a experienced person. I am printing just fine now and the quality is amazing. The details in the outer layers of what im printing is awesome. I been amazed at the precision this prints. I do level the bed and set the z axis every print but thats ok. I think you should probably do that anyways.

• US$ 152.40
  ~
  US$ 254.00

  2020-09-03

  Reviews (170)

  Da****an

  Nothing motivates a Dad like making a his son's dreams come true. Four year olds dream big and my son wanted a chain garbage truck . I found one made by Tonka ages ago but all of them were missing parts and parts aren't available. It left me with the need to create parts. That's what motivated me learn TinkerCAD and to watch 2 days of 3D printer reviews and what I learned from that was what features and price point I wanted to be at. I was ready to buy an Ender 3 and do extensive modification. The budget was getting blown quickly. Then I saw this printer. I watched from reviews and frankly you can geek out on specs and stuff but what I found is that this printer might not be the youtube favorite it would do the job. It far exceeded my expectations. The truck is a Christmas gift so it's going to have to wait but I decided to make my son an auger for his Bruder Bob Cat. Another 4 year old dream. It entailed a bracket for the skid steer and the auger. A ball and socket joint connection. 2 parts that would have to fit perfectly together. So basically I started with the most difficult thing you could print. Cantilevered surfaces and parts that needed exact tolerances. Well this printer nailed it out of the box. Couldn't be happier with it. But most importantly it made me Dad the hero who made another 4 year old dream come true.It comes with everything you could need. Plenty of filament. I am so happy with this purchase. Can't go wrong. AND!!! CURA 4.7 has it listed now so slicing settings are ready to go. I do advise that you use Normal print quality as the extra fine print quality slicing settings need tweaking so just start with normal and you'll be off to printing. The auto bed leveling is incredible. It's just a no brainer. Torture free and easy to use. You don't have to overthink this one. I am just an average guy with average knowledge. I am not an expert by any means. I think the pictures say it all.One last thing. I know there are Ford Truck Guys and Chevy Truck Guys. I've had both. I have not had an Ender 3 but this TronXY machine is like my GMC truck it's just eons better for the money than a Ford. :)

  

  Service: Thank you very much for your praise, your support is our biggest driving force.

• US$ 152.40
  ~
  US$ 254.00

  2020-09-02

  Reviews (170)

  Da****r.

  For a low priced 3d printer I am VERY pleased with the quality of the print from my new Tronxy. It is also SO MUCH quieter than the one we already own. For someone with experience, it was very easy to get set up and printing.

  

• US$ 278.57 US$ 445.00

  2020-08-31

  Reviews (128)

  めそ****っど

  印刷精度は良いと思います。印刷範囲が広いので、小さいものなら個別印刷ができるのはメリットです。ただ、組み立てマニュアルには精度に関するアドバイスがちょこっとあるぐらいなので、初めてのプリンターとしては難しかったです。

• US$ 152.40
  ~
  US$ 254.00

  2020-08-30

  Reviews (170)

  板東****拓也

  すごく静かで匂いもしません。オフィスで使用してますが、気になりません！何度か印刷物が剥がれたことがあったのでスティックのりをおすすめします。マイクロSDに日本語の説明書があります。タッチパネルも直感的に操作でき、コストパフォーマンス抜群だと思います！

• US$ 278.57 US$ 445.00

  2020-08-30

  Reviews (128)

  Wi****ll

  Was exactly what I expected great printer for Right Price I bought corner brackets with it for better support printer does have some deficiencies but easily fixed

  

• US$ 278.57 US$ 445.00

  2020-08-30

  Reviews (128)

  Ma****pe

  This 3D Printer is very good, easy to put together and setup. it does need some improvements in the wire track the screws will not tighten up enough to hold it up off of the motor belts. it took a long time to level the heat bed but once I got it level the prints were quite good. I also have to keep setting the Z offset often for after awhile the bottom of the print flares out( gets squashed). Overall I think this is an excellent printer.