Customer Reviews (463)

• US$ 152.40
  ~
  US$ 254.00

  2020-12-04

  Reviews (170)

  D****.

  this is my first 1st printer and could not be more happy.had this set up in less then 20min and printing within a hourreally like the auto bed level thing makes it easy for someone like me who does not really know what he is doing..time will tell but so far glad i picked this one

• US$ 152.40
  ~
  US$ 254.00

  2020-11-24

  Reviews (170)

  To****on

  Printer works great with PLA. Very easy for a child to start prints.Setup and leveling were straightforward. Very happy about that. Very good value for the money.The print head has hit the clip near the home position. We moved the clip further to the right and that has helped.

• US$ 152.40
  ~
  US$ 254.00

  2020-11-21

  Reviews (170)

  h****o

  2回初期不良で返品して3台目でようやく実用に耐える製品が届きました。ベッドの移動に引っ掛かりがあるものが多いので組み立て時に要確認、要調整です。

• US$ 152.40
  ~
  US$ 254.00

  2020-11-21

  Reviews (170)

  h****o

  2回初期不良で返品して3台目でようやく実用に耐える製品が届きました。ベッドの移動に引っ掛かりがあるものが多いので組み立て時に要確認、要調整です。追記：2020/12/3先ほど印刷開始時にZ調整を行ったにも関わらずプリンタヘッドがベッドに激突しベッドを深く抉りました。懸念した通り、ヘッドが潰れたのかつまり気味となり、ベッドも歪んでしまい第一層の定着すら困難になってしまいました。幸い使用開始からあまり日数が経っておらず返品が可能なので返品しようと思います。

  

• US$ 152.40
  ~
  US$ 254.00

  2020-11-12

  Reviews (170)

  Ro****ne

  For a little bit over $200 it’s a nice 3D printer, perfect for a beginner. It also come just as describe.

  

• US$ 278.57 US$ 445.00

  2020-11-11

  Reviews (128)

  Am****マー

  組み立ては説明書が分かりづらく試行錯誤しながらなんとか組み立てられました。テストでサンプルのモデルを印刷しましたが、円の部分が少し歪んで印刷されました。綺麗に印刷するには色々と調整が必要そうです

• US$ 152.40
  ~
  US$ 254.00

  2020-11-07

  Reviews (170)

  Wi****rk

  Easy easy easy

• US$ 278.57 US$ 445.00

  2020-11-01

  Reviews (128)

  渡****樹

  安くてとても良い商品だと思います。出来上がったモノをテーブルから取りはがす？とテーブルに跡が残るので、テーブルに工夫をしようと思っています。

• US$ 152.40
  ~
  US$ 254.00

  2020-10-29

  Reviews (170)

  J****.

  This is my 1st 3D printer. I've only done test prints so far (using CURA) but it has performed well and as expected. I'm about to print a few designs for home use (security cam mounts) but I'm sure they will be produced correctly. Some of the features that I appreciate: (1) a single cable for all features which runs from the motherboard to the extruder, (2) color touch screen, (3) the ability to pre-heat the bed and hot end from the touch screen. Very happy with the unit.

• US$ 357.23 US$ 664.00

  2020-10-27

  Reviews (42)

  Qu****re

  PROS:With some mechanical aptitude it is not difficult to assemble.Auto level is nice and it works quite well.Z axis offset is easy to set from the touch screen.First print was good with very few issues and the issues I had were operator error.Very quiet.Any requests for support were answered within 24 hours. Usually less than 12 hours.CONS:Instructions are lacking clarity in some areas. However follow the online videos and within a few hours you will have a decent 3D printer.Stepper voltage adjustments were necessary right out of the box. Access to those adjustments is requires disassembly of the control box. Not a simple task.All in all for the price this is quite good.

• US$ 538.20

  2020-10-27

  Reviews (51)

  Qu****re

  PROS:With some mechanical aptitude it is not difficult to assemble.Auto level is nice and it works quite well.Z axis offset is easy to set from the touch screen.First print was good with very few issues and the issues I had were operator error.Very quiet.Any requests for support were answered within 24 hours. Usually less than 12 hours.CONS:Instructions are lacking clarity in some areas. However follow the online videos and within a few hours you will have a decent 3D printer.Stepper voltage adjustments were necessary right out of the box. Access to those adjustments is requires disassembly of the control box. Not a simple task.All in all for the price this is quite good.

• US$ 152.40
  ~
  US$ 254.00

  2020-10-15

  Reviews (170)

  の****お

  初めての3Dプリンタの購入です。値段が安かったこともあり購入を決めました。梱包はしっかりしており、組み立てに必要な工具も含まれていました。予備の部品も入っており好感が持てます。組み立ては難しくはありませんでしたが、モニタは説明書の順でなく最後に付けた方が良いかも。付属のスライスソフトも使いやすいですね。他のソフトもいくつか試してみましたが、結局付属のものを主に使っています。プリント結果はスライス時の設定次第というところです。0.1mm層でプリントすればそこそこ精度の良いものができます。形状によってはサポート材が外しづらいことがあります。設定依存なのは他の3Dプリントも同じでしょう。オートレベリングはとても便利です。無いと使い始めるまでにもっと時間がかかったと思います。サンプルのフィラメントは劣化しているのかポキポキ折れてしまいます。あれは良くないですね。チューブに詰まったのでバラして取り除く必要がありました。そもそも3Dプリンタを使うにはある程度自分で対処できる事が必要でしょうね。とはいえ非常にコストパフォーマンスが高いのでトータルでは満足しています。

  

• US$ 278.57 US$ 445.00

  2020-10-14

  Reviews (128)

  U****4

  1万円の3Dプリンタである程度基礎を覚えたのち、2台目として購入しました。造形サイズ330x330x400、巨大テーブルの調整に便利な16点レベル補正で実売3万は抜群のコスパだと思います。常時8～9000円のクーポンがついてますが、タイムセール中はなんと23500円で、即衝動買いしました。動作は非常に安定しており、適切に設定すれば失敗もほとんど無いと思います。動作音もとても静かで、横で寝られます。組み立て式ですが、そんなに難しい場所は無いので取説の画像と英語を翻訳しながら見れば3時間程あれば組み立てできるかと。以下2点の部品不足がありました。・電源固定用Lアングル問い合わせると「取説から消し忘れているが削除された部品」とのこと。無いと電源の自重で制御基板部分が歪みそうなので、適当な金具を追加して固定しています。・M4-12ボルトボルト類は全体的に余剰に入ってますが、これだけ数が足りませんでした。短いボルトで事足りる部分とやりくりすれば組み立ては可能です。問い合わせの反応はよく、機械翻訳っぽいですが日本語で大丈夫でした。同梱のギフトカードのコードを送ると1kgフィラメントが貰えるそうなので、到着が楽しみです。中華製品にありがちなギフトによる星５レビュー強要はありません。あってもギフト貰った直後にレビュー書き直すだけですが(^^;前面だけで作業ができるようにフィラメントホルダー、エクストルーダー、SDカードスロットなどを前面に移設して使ってます。大物の造形時間を3倍速にするべく、今は1mmノズル0.7mmレイヤーで使えるように調整してますが、これだとフィラメント冷却能力が不足するようで、ファン交換とファンノズルの自作を考えています。

  

• US$ 278.57 US$ 445.00

  2020-10-11

  Reviews (128)

  S****y

  The printer is relatively easy to assemble if you use their youtube video that shows you what to do. It comes with a deal where you can get a free roll of filament. The prints are not as good as the more expensive printers, but considering that it is around 1/10 or 1/20 of the prices of those printers, it is well worth it. It also allows for the user to easily upgrade it so that they can fix any issues they might have while still paying well under the thousands of dollars another 3d printer can cost.

• US$ 152.40
  ~
  US$ 254.00

  2020-10-10

  Reviews (170)

  Sh****al

  This printer has thoroughly impressed me, it printed extremely well with minimal setup, and after throwing on an all metal hotend, a brass e3d volcano heater block, a hardened steel nozzle, a dual drive extruder, and a custom firmware (most of which were very easy mods to do), it prints almost perfectly.The only downside i found with the stock printer is there is no live Z offset adjustment (i use this feature a lot on my ender 3, your mileage may vary)

  

• US$ 152.40
  ~
  US$ 254.00

  2020-10-08

  Reviews (170)

  Ca****is

  This is a substantial upgrade from the Ender 3. Auto Leveling is a godsend. I had a few stringy prints but I haven’t tinkered with the parameters much I’m sure it can be refined. Great machine for the price. Would definitely recommend this over the Ender 3.

  

• US$ 357.23 US$ 664.00

  2020-10-08

  Reviews (42)

  An****er

  Excellent value for money. Works well. Fun to use. My first ever 3d printer. I can't get rid.of stringing, but this is only very important for beautiful and small prints. For large and functional prints - perfect choice.The company is super responsive as well. Helped me on two occasions already.Recommended without doubt.

• US$ 538.20

  2020-10-04

  Reviews (51)

  C****e

  Now for starters this printer is not for beginners. The description saws so. Its quite difficult to get setup. Plan on a day to assemble and get started. Once assembled it seems to be pretty good. Make sure everything is square and level and it should work great. The bed heats up nicely. Have not needed tech support yet. The instructions were not super helpful but it can be done. the printer is not small. Its quite large and enables large prints

• US$ 538.20

  2020-10-03

  Reviews (51)

  P****o

  This is my first printer and so far I really like it. If you cannot assemble anything you may want something else. Here is what I did I went to you tube and they will tell you how to assemble it. The instructions that come with it are useless. I did have to shim the drive unit for the Z axis because the screw drive was in a bind. Leveling the bed is another thing. I just tightened the knobs all the way to bring the bed down and then went from there leveling it. The magnetic mat is well useless, I get the idea but getting anything to really bond to it is not so good. I recommend you go ahead and get a glass bed and some adhesive for your print. You do get a good amount of extras with the kit. You really cannot go wrong with this printer just be patient in your assembly. I will be upgrading parts which I do with everything I buy. Very easy to print with.

  

• US$ 538.20

  2020-09-29

  Reviews (51)

  N****h

  I have been looking at 3d printer of large size and rigid construction for a while now and finally decided it was time to buy one.Assembly took a little while but the instructions were clear. I am good at reading instructions and electronics so I build this without help of others. I see YouTube videos also that show step-by-step installation to supplement the instructions. Be sure to follow instructions and make sure everything is level and align. The setup is a commitment, so be prepared to devote the necessary time to do it right. The bearings for the belt are very nice fixed rollers instead of washers like the older model. The belts are high quality. it took some adjustment but wasn't a terrible process to do. I spend about 5 hours to assemble.Manu is good and clear. So far I have only used the SD to print. I have done only a handful of small projects. What i can say so far is this printer is nice. Very quiet operation and components move smoothly as you would expect.The printer parts look and feel like good quality so I expect it last quite some time. the screen also reacts as expected with no lag.As other review has suggested there is also good Facebook community for this brand. Excited to start playing more with this and getting creative to see what I can create. So many cool projects out there!