Our experience has been great with this printer! It took my husband and son less time to put it together than it did to take it out of the box. Make sure to place the sticker mat on the bed before calibrating the Z offset or leveling the bed. If you end up buying a magnetic mat to go with this printer you will need to buy a different auto leveling sensor. Overall this unit has been great.

Great product. Iv made prints better than my friend with $500 printers.

I bought this so I could make deck boxes, and these have been perfect! very smooth almost perfect, there is some overhang but its 99% perfect. That's without changing the nozzle fan airflow that a lot of 3d printer engineers do, so im sure this could be made better, but for the price I'm more than happy and am glad I bought this over a more expensive 3d printer.The green Deck boxes I made first, and the blue was after some tweaking in my slicerTIPS?: (might just work with smaller objects and even then maybe just to me)1. Don't trust the computer, trust the first layer. Use it to get a good estimate but if its not sticking give up on having a nice surface stop and save the plastic if thats what you want.2. to get the plastic to stick, the flimsy sheet sticks much better, but if the nozzle isn't close enough and the first layer is stringy, stop it, and make sure to use a brim or something similar3. Combing mode was my savior, if your printer goes over a lot of open space and you notice a lot of string, combining mode not only made my prints better but cut down the time by 44%. The green decks were made without combining mode all, and they took 11 to 12 hours to print when the blue only took 7if the printer gets bad in the future ill update how long it lasted and if my opinion changed

Ok, first off I have 5 Tronxy printers, I picked up 4 of these TRONXY XY-2 PRO with Titan Extruder in December of 2020 with their Christmas sale for $169. I have to say I am pretty impressed at that price point. Setup was easy to do, and I had a powered on printer in 15 minutes. After a manual leveling, the auto leveling worked pretty well. But I had some issues.Pros-Great price, quick to put together, great auto bed leveling, filament run out sensor, and all metal hot end.-The power loss feature actually works !!!-Auto leveling. Once you get a good manual leveling, the auto leveling does a great job. Despite by bed issues, I manged to get some great prints on it.-Pretty quite. I have multiple printers and multiple models, it is the quietest printer I have in its Factory state.Cons-The SD card in the the back. Why? I have no idea, the power switch is there too, but not a big issue. I ended up printing a SD card mount and using an extender for the SD card.-The print bed is ok, it comes in two pieces that you have to assemble yourself. I get some pretty decent PLA prints on it, but PETG managed to damage the first one pretty badly. After that I put on a few coats of hair spray to prevent this on the other printers. It mostly worked, but the bed on printer 2 took some damage. The bed is stiff but flexible to pop off the prints, but sometimes has issues returning to completely flat. Even with the mismatched clips (3 pink and 1 yellow on one printer, 3 yellow and 1 pink on another?? At least I had one complete set). The print bed is where I take off 1 star, since I had issues with 3 out of 4 of them.-One of my touch screens was very baddy calibrated, it took a bit, but I was able to get it calibrated.

The price range of this printer is great for getting into 3d printing without breaking the bank. The print quality out of the box is good but you will have to play with the slicer program to do some fine tuning with your print plastic they all don't print the same. I have had fun learning with it and the auto bed levling is a nice feature to have

Your browser does not support HTML5 video.

 Amazing quality, especially for the price! I can't believe it. I don't know how they can even do this even if they didn't make a profit, it's incredible. Much better than my first 3D printer that I bought 5 years ago! this thing prints great Straight Out of the Box. Sub $200!? Wow

Your browser does not support HTML5 video.

 Amazing quality, especially for the price! I can't believe it. I don't know how they can even do this even if they didn't make a profit, it's incredible. Much better than my first 3D printer that I bought 5 years ago! this thing prints great Straight Out of the Box. Sub $200!? Wow

Works better than most printers. Haven’t had a single problem with this masterpiece. Love it

This is a awesome printer for beginners and experienced users.The print quality is excellent and abl works great.Over all an awesome printer at a great price.Would definitely recommend this printer.

Simple to set up, and the first few prints turned out as well as to be expected. Very reasonable price. One thing I'd suggest is that when you unpack everything, be sure to find the USB stick and review the files on there before looking at the instruction booklet. Their video guides really helped make the setup process more clear. Would recommend.

Fantastic machine easy to work with and great print quality. Auto bed leveling is amazing. Takes away one of the most annoying tasks of owning an fdm printer

The print quality was nice and it was really easy to assemble.

This is the easiest printer I have ever put together, level, and get going. Seriously, there are only 8 screws you have to adjust, connect a few wires, and maybe tighten a roller (it comes with all the tools for setup and a micro sd card and usb micro sd card reader/writer). The motors are super quiet and has many features that you would expect in a printer that cost over 3x what this one does. This thing has exceeded my expectations!

very easy to assemble and setup and whisper quiet ,,, would buy again,,, time from out of box to printing 1/2 hr.......

This is a really reliable printer, it's pretty quiet and works really well. It's built solid and super easy to assemble, just 4 screws and you're done. I actually bought 3 of these printers over Christmas for my 3d printing business as workhorse printers and they haven't failed me yet. The auto bed level works great and the LCD touch interface is very fast and responsive I was really impressed actually. The Heating bed and Nozzle heat super fast, like impressively fast, the bed especially, like within 30 seconds fast. One more thing, DONT use this for ABS filament, it will print, but you will destroy the heating pad (The flexible pad is great as well). I bought 3 of these so I'll leave the same review for the other two.

This printer is very quiet, except for the front fan, which isn’t any louder than any other fan however the printer when printing is super silent. I was very shocked. Overall a good deal and printer.

For 130 dollars ( brought with a Coupon) I am impressed. I usually don't write reviews but I thought this deserves a better rating. It's pretty good probably the best 130 dollar printer you can buy. The fans are pretty loud but the Assembly was easy and with some basic setup the prints come out great.

Works great!

This is the first 3d printer I own. It was easy to setup and easy to use. I had it up and running in about 40 minutes and was able to do my first print. The print quality is quite good for what I need. I have not had any problems yet running it 3 or 4 times a week.

this is my first 1st printer and could not be more happy.had this set up in less then 20min and printing within a hourreally like the auto bed level thing makes it easy for someone like me who does not really know what he is doing..time will tell but so far glad i picked this one