Printer works great with PLA. Very easy for a child to start prints.Setup and leveling were straightforward. Very happy about that. Very good value for the money.The print head has hit the clip near the home position. We moved the clip further to the right and that has helped.

For a little bit over $200 it’s a nice 3D printer, perfect for a beginner. It also come just as describe.

Easy easy easy

This is my 1st 3D printer. I've only done test prints so far (using CURA) but it has performed well and as expected. I'm about to print a few designs for home use (security cam mounts) but I'm sure they will be produced correctly. Some of the features that I appreciate: (1) a single cable for all features which runs from the motherboard to the extruder, (2) color touch screen, (3) the ability to pre-heat the bed and hot end from the touch screen. Very happy with the unit.

This printer has thoroughly impressed me, it printed extremely well with minimal setup, and after throwing on an all metal hotend, a brass e3d volcano heater block, a hardened steel nozzle, a dual drive extruder, and a custom firmware (most of which were very easy mods to do), it prints almost perfectly.The only downside i found with the stock printer is there is no live Z offset adjustment (i use this feature a lot on my ender 3, your mileage may vary)

This is a substantial upgrade from the Ender 3. Auto Leveling is a godsend. I had a few stringy prints but I haven’t tinkered with the parameters much I’m sure it can be refined. Great machine for the price. Would definitely recommend this over the Ender 3.

After returning two printers from other companies for quality issues. I am very pleased with thos printer. Easy to set up and perfect print first time.

This is the first 3d printer that I've bought and I have had a lot fun with it. It is a bit of a learn as you go kind of deal if you've never done it before but I'm happy I bought this.

We purchased this for our son for his 12th birthday. It is a great 3D printer for beginners! It has been easy to work with and easy to use!

Nothing motivates a Dad like making a his son's dreams come true. Four year olds dream big and my son wanted a chain garbage truck . I found one made by Tonka ages ago but all of them were missing parts and parts aren't available. It left me with the need to create parts. That's what motivated me learn TinkerCAD and to watch 2 days of 3D printer reviews and what I learned from that was what features and price point I wanted to be at. I was ready to buy an Ender 3 and do extensive modification. The budget was getting blown quickly. Then I saw this printer. I watched from reviews and frankly you can geek out on specs and stuff but what I found is that this printer might not be the youtube favorite it would do the job. It far exceeded my expectations. The truck is a Christmas gift so it's going to have to wait but I decided to make my son an auger for his Bruder Bob Cat. Another 4 year old dream. It entailed a bracket for the skid steer and the auger. A ball and socket joint connection. 2 parts that would have to fit perfectly together. So basically I started with the most difficult thing you could print. Cantilevered surfaces and parts that needed exact tolerances. Well this printer nailed it out of the box. Couldn't be happier with it. But most importantly it made me Dad the hero who made another 4 year old dream come true.It comes with everything you could need. Plenty of filament. I am so happy with this purchase. Can't go wrong. AND!!! CURA 4.7 has it listed now so slicing settings are ready to go. I do advise that you use Normal print quality as the extra fine print quality slicing settings need tweaking so just start with normal and you'll be off to printing. The auto bed leveling is incredible. It's just a no brainer. Torture free and easy to use. You don't have to overthink this one. I am just an average guy with average knowledge. I am not an expert by any means. I think the pictures say it all.One last thing. I know there are Ford Truck Guys and Chevy Truck Guys. I've had both. I have not had an Ender 3 but this TronXY machine is like my GMC truck it's just eons better for the money than a Ford. :)

For a low priced 3d printer I am VERY pleased with the quality of the print from my new Tronxy. It is also SO MUCH quieter than the one we already own. For someone with experience, it was very easy to get set up and printing.

Amazing hobby printer for the price, easy to assemble so you can start printing right away. Bonus features like the touch screen, rubber feet, auto bed-leveling, power-loss resume function, larger build volume, and efficient extruder assembly blow the lower-end competitors out of the water. Great for beginners!

Have had several different 3d printers and this is hands ✋ down the best !

This is my second 3D printer and I highly recommend it to anyone from beginner to advanced user.Auto Bed Leveling was the primary reason why I bought this printer and it was totally worth it!Print bed size is huge!!!Works with octoprint!!!

I read varying reviews regarding this printer but I was in tested given the self leveling bed and the Titan extruder. After a little tinkering after putting it together it has been great. Only issue after setting it up was z motor wasnt plugged in correctly do...i i had to make some adjustment there. Bed levelled easily and first print was great. The Tronxy slicer is ok it's nothing special but it gets it done. The filament thst comes with it it's average but i purchased some different filament and it prints so much better. I got this for a great price and with its features it's much better than the Ender 3. Thre touch screen makes it easier too. Great value for money.

At first, I was skeptical at the low price of this printer. But, when I got it, it worked excellently, and it was easy to assemble. The model is similar to the ender 3, but it's much better, and has auto bed leveling, which is worth it for the slight price increase. If someone asked me if this was a good starting printer, I would definitely recommend it, mainly because of how easy it is to use and how easy it is to set up.

At first, I was skeptical at the low price of this printer. But, when I got it, it worked excellently, and it was easy to assemble. The model is similar to the ender 3, but it's much better, and has auto bed leveling, which is worth it for the slight price increase. If someone asked me if this was a good starting printer, I would definitely recommend it, mainly because of how easy it is to use and how easy it is to set up.

This printer is awesome. Super easy to set up and the bed leveling is cool. First print after about 30 minutes of assembly turned out perfect. Must buy!

Great 3d printer easy to assemble. it's been four weeks non stop printing and it's printing great

Great 3d printer easy to assemble. it's been four weeks non stop printing and it's printing great