Customer Reviews (463)

• US$ 152.40
  ~
  US$ 254.00

  2019-12-11

  Reviews (170)

  Am****er

  This was my second attempt at getting into 3D printing. My first was a refurbished Monoprice that I could not get dialed in at all, and after many failures, just gave up. So after reading many reviews for a starter printer that had features I wanted, (auto level, resume print, filament detection) I went with this one. The instruction booklet is great, and takes you step by step through assembly, leveling, and print set up. If you follow the instructions you'll be up and printing within an hour. My first test print of the dino model went off without a hitch. Being a 10 hour print, I was impressed by the pin jointed dino model, and was surprised it printed the joints as the whole model printed. It's a solid little printer with a good build area. The only cons are the location of the SD card port, and the short power cord.The LCD screen and menus are fantastic, and the leveling functions are awesome. For the price point, this printer is excellent for the beginner/hobbyist.

  

• US$ 445.00

  2019-12-09

  Reviews (128)

  M****.

  The printer came in a fairly large box that weight in the neighborhood of 30 lbs. I opened it and was pleasantly surprised in the way everything was packaged. Wow, TronXY went to a lot of trouble to keep everything separated and easy to find. I laid everything out in their own groups, the beautifully painted frame, Z carriage pieces, gantry and hotend, power supplies, switches, a USB stick with a Micro SD card inserted, etc. I found beautifully illustrated manual inside the box with step by step instructions, which I opened and got ready to assemble the frame. Everything is laid out in millimeters and, other than my calipers, all my measuring tools are in inches, so I had to do a lot of translating to inches to make sure I got the right pieces in the right place. When I tried to find the long parts of the frame I panicked because none of the 2020 or 2040 parts were anywhere near the length of the frame shown in the printed manual! I finally plugged the USB drive into my laptop and opened the manual on there. FANTASTIC!! This manual had the right dimensions for MY machine. I have to believe the printed manual was for either the 400 X 400 or 500 X 500 models instead of my 330 X 330. In about an hour I was able to assemble the frame and put on the XY gantry and hotend. Be sure to slide the feet out as far as possible toward the end of the 2020 because you'll need the space to get the power supply and main board mounted when that step comes up. XY motors were easy to figure out. Z wasn't too difficult but be aware that you will need to move the carriage to the top with the screws and snug it up, move it down a little and tighten it. If you don't do this, you'll wind up with the top bearing in the wrong place and the Z screw will be out of line, putting the Z carriage in a bind and adding extra work onto the Z motors, possibly even burning out a driver. After mounting the heated bed, installing limit switches and wiring everything up, I was ready to try it out. First thing I noticed was that the cable chain connection is very weak where it connects at the back. It kept coming loose and I finally had to print a support bracket for it on my other printer. I started it and homed it, then ran the leveling routine. Wow, the machine does 16 points on the bed and does it quickly. I was worried that it did it so fast, so I ran it a second time and compared the numbers. Almost identical! NICE!! Overall, I love this printer. I've added corner brackets for stiffness and I put OctoPrint on it but otherwise I've not changed it. I will print with it for a while and see how well it prints.

  

• US$ 152.40
  ~
  US$ 254.00

  2019-12-09

  Reviews (170)

  ch****on

   Great machine for beginners. You can bolt it together level the bed and print. With some mods I am getting fantastic results with the xy2pro. Am even able to print flexible filament . I always just ditch abl and add a z limit switch and glass bed to my printers but the abl feature did seam to work the 1 time I let it run. This type of sensor does not work reliably with a glass bed. The machine showed signs of being tested at the factory( filament in hotend) which is very rare for a Chinese company. The stock hotend cooler is less than optimal as it blows on the hotend also but just about any can duct for an ender 3 or x5s on thingiverse will work. Also print yourself some bigger knobs for the bed level screws and save the hasstle of the stock ones. The left rear is especially difficult to reach. The chassis is all 20/40 and 40/40 extrusion and is very rigid. The rubber feet are quite stout too. A very competent printer for the price point for sure with a few mods and very little money can be a great printer There are also a few Facebook groups with fantastic members that can help out with any questions that may arrise

  

• US$ 152.40
  ~
  US$ 254.00

  2019-12-04

  Reviews (170)

  Lu****le

  Anna: gut glück, die produkte sind Von guter qualität und die preise sind sehr günstig. Ja, im moment ist alles in ordnung. Ich bestellte einen prototyp, und der stand war total cool.

• US$ 152.40
  ~
  US$ 254.00

  2019-12-04

  Reviews (170)

  J****o

   this printer took me less than 30 minutes to assemble and start printing. i was surprised at how quiet it is. i did have to adjust the titan extruder to print with tpu and it was able to give me a good print with tpu at 60mm/sec which is twice as fast as my xy-2 pro with the standard extruder. Well worth the extra money for the upgraded version.

  

• US$ 152.40
  ~
  US$ 254.00

  2019-12-02

  Reviews (170)

  H****.

  Seems to be consistent. I kept trying different brands and kept getting different size in diameter throughout the roll and even wet filament. This one worked out pretty well. Love the color as well.

• US$ 152.40
  ~
  US$ 254.00

  2019-12-02

  Reviews (170)

  T.****en

  Don't let the sketchy outer cardboard box fool you--there's a proper vacuum bag with desiccant inside. As with all PLA Plus / Ultra PLA materials, this has a fairly high elasticity while molten and requires a somewhat higher hotend temperature. In order to ensure the color is retained, it is also necessary to use a lot of part cooling. One you spend a minute figuring it out, this stuff is pretty easy to work with.

• US$ 445.00

  2019-11-28

  Reviews (128)

  Br****ro

  Muy conforme con el producto. Exelente relación calidad precio

• US$ 152.40
  ~
  US$ 254.00

  2019-11-28

  Reviews (170)

  J****.

  I am very happy with this filament. I like functional prints, so this first set of speaker mounts were a good test. They are nice and strong, good layering, and printed without any real noticeable issues at all. These are printed on my Geeetech A10M with Cura 4 settings as follows. Layer height 0.15 Wall thickness 1, 60% Cubic infill subdivision, speed 60, and a brim (although entirely unnecessary.

  

• US$ 152.40
  ~
  US$ 254.00

  2019-11-28

  Reviews (170)

  P****.

  The Tronxy XY-2 PRO Titan is a great printer. I printed a test cone and it came out smooth. At first the printer needed a few adjustments such as belt tightening. As a couple failed prints and the adjustments its prints great. Tronxy also has great customer support and they walked me through any issues i had. The touch sceen is really responsive and it allows you to adjust the printer settings( temp, speed, extrusion) even during a print.

• US$ 152.40
  ~
  US$ 254.00

  2019-11-27

  Reviews (170)

  K****e

  I have the 3I DIY 3D printer that was causing me a lot of problem about finding the right filament because the hot bed is not that good and material are not always stick on the plate. I tried this filament and it does work on my cheap 3D printer. I just want to remind everyone that you should using it in an open area and away from kids.

• US$ 152.40
  ~
  US$ 254.00

  2019-11-26

  Reviews (170)

  幸****運

  私はすでにとても長い時間を使って、買った時に更に時間を考えて、今本当に使えば使うほど気持ちがよくて、時に本を見ることができて、xy-2 Proを仕事にしていて、いつの間にか印刷して、とてもつるつるしてきれいで、いいですね

• US$ 152.40
  ~
  US$ 254.00

  2019-11-26

  Reviews (170)

  C****s

  Excellent beginner printer, however, mine was buggy

• US$ 152.40
  ~
  US$ 254.00

  2019-11-26

  Reviews (170)

  C****s

  Excellent beginner printer, however, mine was buggy

• US$ 445.00

  2019-11-26

  Reviews (128)

  Ca****A.

  The frame is straight and tough enough. After the assembly, there are many parts about the stock. Of the minuses-bad bearings of rollers, on which the belt goes, rotate smoothly. The same bearings in the rollers on which the carriage rolls on the frame are excellent.

• US$ 152.40
  ~
  US$ 254.00

  2019-11-26

  Reviews (170)

  as****18

  The silver is a great color choice and makes good quality prints

• US$ 152.40
  ~
  US$ 254.00

  2019-11-24

  Reviews (170)

  J****o

  Great printer had I out of box printing in about an hour this is my fourth printer. Assembly on took about 30 mins. I like the quick setup the only thing I didn't like was that there is only one z motor but that doesnt seem to hinder performance. Other than that I would say it would be great for beginner or people who hate alot of assembly and adjustment.

  

• US$ 152.40
  ~
  US$ 254.00

  2019-11-24

  Reviews (170)

  J****o

  Great printer had I out of box printing in about an hour this is my fourth printer. Assembly on took about 30 mins. I like the quick setup the only thing I didn't like was that there is only one z motor but that doesnt seem to hinder performance. Other than that I would say it would be great for beginner or people who hate alot of assembly and adjustment.

  

• US$ 152.40
  ~
  US$ 254.00

  2019-11-22

  Reviews (170)

  コバ****パパ

  コスパはいいと思います。電源コードがアース付き（３ピン）だったので、アダプターを買う必要がありました。 また、専用ドライバーがMacでは開けず、フリーのスライサーソフトをダウンロードしました。（cura） 造形エリアは充分なので、Macで使え／マニュアルが日本語で／メモリーを前からさせれば星５つです。

  

• US$ 300.95
  ~
  US$ 463.00

  2019-11-22

  Reviews (16)

  R****.

  I am very pleased with this printer, after Maker's muse reviewing it on youtube, Tronxy take a quick response to fit the thermal runaway problem, I really appreciate it.The printer just taken me 20 minutes to assemble, after everthing is ready, I started print my first prints, to my surprise, D01 has a LED light on the printer head,wow,the prints looks amazing with shiny. That is incidental pleasures.