Customer Reviews (463)

• US$ 548.87

  2020-07-06

  Reviews (3)

  G****y

  This is my second 3-D printer that I have owned. The first one that I owned was a Robo r1+. Although that printer had a large printing area I could never really get it to print super accurately and was constantly calibrating it. I ended up selling it because I could never quite get it to work right. I bought this 3-D printer because it seems super easy to use and I like that it had a small footprint as I never really print anything that large anyway. This printer prints extremely accurately and well right out of the box with zero calibration. I really like the removable bad because it makes it really easy to get the items that you have printed off of the printing bad. The software that comes with is plenty powerful enough to print pretty much anything that you want. It comes with an SD card so that you don’t have to buy one. Even the filament that it comes with seems high-quality and I have printed some pretty strong things with such as bag clips. Overall I am very satisfied with this printer and I have had it printing nonstop for the last two weeks. Not a single print hasn’t turned out well. The only drawback to its accuracy is that it does print very slowly. Things that would take my last printer a half hour to print takes this printer 2 hours. But slow and steady wins the race, as the prince from this printer turn out high quality and accurate. I would recommend this printer to anyone who is just getting into 3-D printing and wants some thing that works right out of the box without being intensely involved with constant calibrations.

  

• US$ 152.40
  ~
  US$ 254.00

  2020-07-04

  Reviews (170)

  T****s

  I read varying reviews regarding this printer but I was in tested given the self leveling bed and the Titan extruder. After a little tinkering after putting it together it has been great. Only issue after setting it up was z motor wasnt plugged in correctly do...i i had to make some adjustment there. Bed levelled easily and first print was great. The Tronxy slicer is ok it's nothing special but it gets it done. The filament thst comes with it it's average but i purchased some different filament and it prints so much better. I got this for a great price and with its features it's much better than the Ender 3. Thre touch screen makes it easier too. Great value for money.

• US$ 152.40
  ~
  US$ 254.00

  2020-07-03

  Reviews (170)

  須****弥

  流石、中国製(良い意味で)です。この価格で３Ｄプリントが出来るなど予想もしていなかった。プリンター付属のスライサーソフトも本機のために良く練って作られている。使い始めて丁度お試し用のフィラメント(250g)が無くなったところですが問題なく動いています(別注で1Kg購入)。気になったのはテーブルXYが各255mmですがデータ250mmの物をプリントしようとしたところスタート位置が中央付近から始まってしまいエラーとなった。その他、交換用のプラットフォームシートが無いため大きめの物を購入し切って使うのだろうか(不明)。日本語のマニュアルもＳＤカード内にあるので問題なし。まさにこんな時代になったのですね！！

• US$ 152.40
  ~
  US$ 254.00

  2020-07-02

  Reviews (170)

  m****a

  オートレベル機能もあり、調整は悩みませんでした。印刷も予想通りで、はがれも起きませんでした。但しこのようなプリンタ－は構造や調整方法の理解をしておく必要がありますので、ネットなどで検索して先人のノウハウを見て組み立て、調整されるのが良いですね。

• US$ 445.00

  2020-07-01

  Reviews (128)

  カッ****キー

  慣れていないと、組み立ては難しいと思います。気持ち良く作動していますし、意外と静かです。欠点はz軸の左右にセンサーがない事。造形物を取る時、造形台が上下に動いてしまう。0点調整をやり直さないといけない事です。z軸が左右でズレてしまう。0点のセンサーは付いているが、この時は役に立たない。

• US$ 152.40
  ~
  US$ 254.00

  2020-06-30

  Reviews (170)

  薊****薊

  組み立てもすぐで非常にわかりやすいものとなっています。同梱されている説明書は英語ですが、SDカードの中に日本語版も入っていました。難点があるとすれば組み立ての時のネジが少し硬く力があることぐらいだと思います。印刷精度についてです。外径は寸法通り出力されますが、内径は少し小さめに出力されるので、内側に穴を開けたりする場合は少し大きめに設計する方が良いと思います。自動レベリング機能があったのでこの商品を買いました。この機能はとても便利なので満足しています。静音性に関しては初めての3dプリンターですのでわかりませんが、ファンの速度を60%にするととても静かでした。

• US$ 152.40
  ~
  US$ 254.00

  2020-06-29

  Reviews (170)

  Lo****er

  At first, I was skeptical at the low price of this printer. But, when I got it, it worked excellently, and it was easy to assemble. The model is similar to the ender 3, but it's much better, and has auto bed leveling, which is worth it for the slight price increase. If someone asked me if this was a good starting printer, I would definitely recommend it, mainly because of how easy it is to use and how easy it is to set up.

• US$ 300.95
  ~
  US$ 463.00

  2020-06-29

  Reviews (16)

  C****s

  I did some research on this machine and another very similar machine made by a different company. I will be honest, they both had pretty bad reviews. I really like the size and look of the D01 and the one thing that was mentioned in every review was how solid the structure of the D01 is. I bought the Tronxy D01 fully expecting that I was going to need to upgrade a lot of components to make it serviceable. I assembled the printer in less than 30 minutes and figured I would test it before I ordered any of the upgrade parts I had on my list. The only thing I did that was not part of the normal assembly was rebuild the hot end. (I do this on every new printer I buy) There are some good videos on YouTube. The main thing I look for is the way the insulator tube is cut, most of the time they are not straight and don't seal well to the tip. I fired up the D01 and printed the standard Benchy, Cube, etc. I was surprised at how well they came out! I wasn't expecting much, but the D01 handled everything like a champ. I decided to give it a real challenge and loaded up a dragon that even the best printers struggle with, I'm not going to say it was perfect, but it sure wasn't bad considering I haven't had any time to fine tune the settings. I couldn't be happier! I honestly see no need to upgrade the D01. As soon as they go on sale again, I'll be picking up a couple more for my shop!

• US$ 152.40
  ~
  US$ 254.00

  2020-06-29

  Reviews (170)

  Sp****LC

  At first, I was skeptical at the low price of this printer. But, when I got it, it worked excellently, and it was easy to assemble. The model is similar to the ender 3, but it's much better, and has auto bed leveling, which is worth it for the slight price increase. If someone asked me if this was a good starting printer, I would definitely recommend it, mainly because of how easy it is to use and how easy it is to set up.

• US$ 300.95
  ~
  US$ 463.00

  2020-06-29

  Reviews (16)

  Do****ne

  I did some research on this machine and another very similar machine made by a different company. I will be honest, they both had pretty bad reviews. I really like the size and look of the D01 and the one thing that was mentioned in every review was how solid the structure of the D01 is. I bought the Tronxy D01 fully expecting that I was going to need to upgrade a lot of components to make it serviceable. I assembled the printer in less than 30 minutes and figured I would test it before I ordered any of the upgrade parts I had on my list. The only thing I did that was not part of the normal assembly was rebuild the hot end. (I do this on every new printer I buy) There are some good videos on YouTube. The main thing I look for is the way the insulator tube is cut, most of the time they are not straight and don't seal well to the tip. I fired up the D01 and printed the standard Benchy, Cube, etc. I was surprised at how well they came out! I wasn't expecting much, but the D01 handled everything like a champ. I decided to give it a real challenge and loaded up a dragon that even the best printers struggle with, I'm not going to say it was perfect, but it sure wasn't bad considering I haven't had any time to fine tune the settings. I couldn't be happier! I honestly see no need to upgrade the D01. As soon as they go on sale again, I'll be picking up a couple more for my shop!

• US$ 445.00

  2020-06-29

  Reviews (128)

  Am****マー

  昨年の年末に購入、そんなに使ってないのに、半年で電源が入らなくなったもの凄く気に入ってたのに、残念です・・・

• US$ 570.00

  2020-06-27

  Reviews (3)

  B****n

  I've built a few 3D printers and this one by far has to be the easiest one so far. The included mSD card contains a digital copy of the instruction manual as well an instructional video. While the instruction manual was a little confusing at first due to it telling me what screws to use by referring to their number in the list of contents instead of their actual size the rest of the setup was a breeze and all required tools were included. Once the printer was all set up I leveled the bed with ease due to the build plate being flat and went on to print the sample stls included on the mSD card. Without any calibration the prints came out great!

• US$ 538.20

  2020-06-26

  Reviews (51)

  T****y

  This is my 1st printer and it's great! I'm a hands-on kinda guy and while I was advised not to go with this model because its not for beginners, I found out that it was a little harder than I thought to assemble but not impossible if you have a technical mindset. I'm still tweaking it to acheive the best results and it's important to say that it worked well enough right away. While waiting for delivery I watched many videos for assembly and troubleshooting and it helped a lot. Overall very satisfied with my purchase!

• US$ 445.00

  2020-06-24

  Reviews (128)

  松****男

  プリンターとしてはなかなか気に入ってます。多少強度的に問題がありそうですが解決に時間はかかりません。しかし、アフターが悪いのでしょうか。メーカーに問い合わせをしても返事がこない。売ったら終わりの態度は中華サービスなんでしょうね。私は20年間中国で仕事をしてましたが、責任感のない態度は治らないのでしょうね。残念です。

• US$ 548.87

  2020-06-22

  Reviews (3)

  J****n

  This was a gift for my nephew, but I've been helping him use it and it is SO fun! We've made little knick knacks, a toothbrush holder, and even a guitar pick! I have never owned a 3D printer or used one, and I was able to figure it out relatively quickly (with the help of my nephew). We just went on a free website to download the files and used the application that the printer comes with to convert the files into ones that the printer can read. The USB it comes with has all of the instructions with it and even comes with a little starter design to print. They have even placed video instruction files on the USB to made things even clearer. You have to have your files ready and converted on the SD card, then turn the printer on and feed the filament through the feeder piece on the top. Once the filament is snug, toggle the switch in the back to either side. Once you see the filament coming out of the other end, you put the switch back to the middle, plug your SD card in, and press the button. Then the magic happens! I would recommend googling the website called thingiverse. This is where we were able to find all of the fun objects to make! Also, it may be much easier to remove the objects from the printer platform if you place an even layer of tape on it, as we had a difficult time removing some of the prints. Just my two cents. The printer's design is also something that drew me to purchase it-- it reminds me of a space ship or some kind of futuristic invention. I would definitely consider this a beginner 3d printer for its size limits and capabilities, but it can still make most objects. Its noise level is relatively low as well, as my nephew was able to sleep through its printing in his room throughout the night with no issues. The only thing that gets a little annoying is how long it can take to print (sometimes several hours). Other than that, I have no complaints. I highly recommend! Pros: -Easy to set up and use right away -Comes with everything needed to start printing -Doesn't make a lot of noise -Educational for kids Cons: -May not be able to print extremely detailed prints -Can take several hours for more difficult prints

• US$ 864.78 US$ 1364.00

  2020-06-19

  Reviews (8)

  Gr****er

  So far so good. Got this for my kids for Christmas, but gave it to them at Thanksgiving. It took some time to put together, and then the downloads weren’t really working right, so it took a day for me to get the program up and running. Showed them how to use it and they’ve been off and running. My kids are pretty artistic too, so they love being able to print then paint and they have been making tons of Christmas gifts for family and friends. They have long lists of what they want to print and they have a cue of prints. Some of my kids are home during the day, so the printer is running from morning to night. We quickly upgraded the springs, and that was a HUGE time saver. For reference my kids range from preschool- high school and they all use it in varying degrees. Also, if you do buy this there are some really great Facebook groups that can help with any questions you have. I wish I had found them before I spent so much time with the software.

  

• US$ 570.00

  2020-06-18

  Reviews (3)

  Gi****ta

  Sono il proprietario della stampante 3D per la prima volta. Ho un forte background tecnico informatico e osservo lo sviluppo della stampante 3D domestica da molti anni. Alla fine ho scoperto che XY-3 Pro era al punto che avrei avuto il tempo, i soldi e la pazienza per lavorarci. L'ho ordinato ed è stato spedito prontamente. La confezione era eccellente. L'assemblaggio è stato una sfida poiché il foglio di istruzioni a doppia faccia non lo taglierà. La community di stampanti 3D è fantastica, quindi mi è stato dato il link per un fantastico video di build. Con esso e il foglio di istruzioni insieme, è stato divertente passare il tempo a costruire la mia macchina e conoscerla allo stesso tempo.

• US$ 538.20

  2020-06-16

  Reviews (51)

  B****e

  Best filament printer on the market but I wish it did come with Different size nozzles

  

• US$ 445.00

  2020-06-13

  Reviews (128)

  麦****茶

  初めての3Dプリンターでした。ステージの調整に時間がかかりましまが、一発目でもこれだけマトモに作れたことに感動しました。なお組立は5時間くらいかかりました。この辺は慣れが必要かも知れません。

  

• US$ 570.00

  2020-06-12

  Reviews (3)

  E****d

  After doing some 3D printer research online I settled on a Tronxy XY-3 Pro. I ordered a printer along with some of their black PLA to start with. Despite having no experience with 3D printers, I had everything assembled in about 45 minutes. I’d already viewed a few Youtube videos on leveling the printing surface and had that completed in another 5 minutes. I decided to do a test print with one of the files on the included SD card. Everything was up and printing in less than an hour. The software is fairly intuitive and easy to figure out once you start messing with it. I didn’t find a need to find any step-by-step instructions. Overall I’m fairly pleased with my purchase. I feel like I got a fair price for a quality product. 3D printing isn’t as expensive or difficult to do as I thought it would be and I’m kind of bummed I didn’t get into the game sooner. If you are thinking about getting into 3D printing, this product is a good starting point even for a newbie like me. My test piece took a little over 2 hours to complete by the way.